MATRIX Creator and MATRIX Voice For Raspberry Pi

MATRIX Labs have now released a new Raspberry Pi accessory that combines a whole new level of sensors built into miniature computer. The MATRIX Creator – was built with an aim of giving every hobbyist, tinkerer, and hackers around the world a complete, affordable, and user friendly device for simple as well as complex Internet of Things creation.

---

Sponsor Link

This Project is Sponsored by UTSource. UTSource is a professional electronic components supplier.

---

MATRIX Creator

The MATRIX Creator is an all-inclusive hardware device that connects to the GPIO pins on the Raspberry Pi and provides a means for any developer around the world to start making machine learning, computer vision, and Internet of Things applications within minutes,[AdSense-C] MATRIX Creator is powered by a Xilinx Spartan 6 FPGA, a super powered miniature ARM Cortex M3 microcontroller, a collection of precise sensors for motion sensing, temperature, humidity, light, ultraviolet and infrared measurement, an 8-microphone array and a 35-LED array. This board can be programmed in multiple languages in various levels. It employs Z-Wave and Zigbee protocols for wireless connectivity and a wide range of analogue and digital input/output interfaces.

MATRIX Creator Components

Cortex-M3MicrophonezigbeeZ-wave

NFCLED ArrayEnvironmental3D Gyroscope

Components

Microcontroller	Amtel Cortex-M3 ATSAM3S2
FPGA	Xilinx Spartan 6 XC6SLX4
Microphone Array	8 MEMS MP34DB02 audio sensor digital microphones
IMU	ST LSM9DS1 3D accelerometer, 3D gyroscope, 3d magnetometer
Temperature / Humidity	ST HTS221 capacitive digital sensor for relative humidity and temperature
Altitude Sensor	NXP MPL3115A2 precision pressure sensor with altimetry
zigbee	Silicon Labs EM358X – 2.4 GHz IEEE 802.15.4
Z-Wave	Sigma Designs ZM5202 – 868/908/921 MHz
IR Reciever	Vishay TSOP573 – carrier 38.0 kHz
IR Blaster	2 Vishay LEDs (front and bottom), 930nm, 100mA, 120° viewing angle
Ultraviolet Sensor	Vishay VEML6070 UV light sensor
NFC	NXP PN512 NFC reader
Everloop	35 RGBW LEDS

See more information

Compatibility[AdSense-C]

Hardware
Raspberry Pi B+ or newer
Raspberry Pi Zero
UP board

Software
Raspbian
Debian
Android Things

 MATRIX Voice

MATRIX Voice, on the other hand is a smaller board that mainly focuses on voice detection and recognition projects. In addition to its ability to connect with Raspberry Pi, it can also be used as a standalone module by taking advantage of its FPGA capabilities. This little development board consist of a radial array of 8 MEMS microphones, 18 RGBW LED’s and 64 GPIO pins, which is linked to a Xilinx Spartan6 FPGA and 64 Mbit SDRAM.  This provides the hobbyists and developers a wonderful opportunity to add custom voice and hardware-accelerated machine learning technology In no time. An advanced version of this MATRIX Voice is also available employing a ESP32 Wi-Fi / BT chipset which will enable users to easily connect to the network or other devices via WiFi and Bluetooth in no time.

Size

MATRIX VOICE consist of a 3.14-inches in diameter development board with radial array of 8 MEMS microphones, with 18 RGBW LED’s connected to it. MATRIX Voice weighs 2 oz.

Matrix Voice Components

FPGAMic ArrayRAM

FLASHLED ArrayESP32

Components

FPGA	Xilinx Spartan 6 XC6SLX9
Microphone Array	8MEMSMP34DB02 audio sensor digital microphones
Everloop	18 RGBW LEDS
RAM	64 MByte 132MHz SDRAM
FLASH	64Mbit Flash Memory
ESP32 (MCU w/WiFi/BT) (Optional)	Wifi 2.4Ghz 802.11bgn – BT 4.0 LE – Microcontroller Tensilica Xtensa dual-core 32-bit LX6

See more information[AdSense-C]

Compatibility

Hardware
Raspberry Pi B+ or newer
Raspberry Pi Zero
UP board

Software
Raspbian
Debian
Android Things

Click Here to Start Setting Up you MATRIX Voice/Creator